- Repairs & Estimates
- Focus Issues
- Recycling
- Contact Us
- Terms & Conditions
- Privacy & Cookies Policy
- Cookie Policy

Repairs & Estimates
If you bring your repair in person, we will book it on our system and issue you a receipt with a job number while you wait. If you send your equipment, we will normally book it on our system on the day we receive it, or occasionally the next day.
If you supply us with an email address, we will send you a receipt for your equipment by email, showing the details of the equipment and any accessories received; whether you have requested an estimate; whether you are claiming the repair under warranty; and any notes about the fault or work required. Please check this carefully and let us know if you disagree with any aspect of the receipt. It will be very helpful if you quote your unique job number in any communication with us.
Simply complete our online repair form and send us your equipment. This will give us the information we need to understand the problems with your equipment and give you the most efficient service.
Print two copies of the form – one for your own records and another for inclusion in the parcel when you send us your gear.
Package your equipment well! We suggest you use bubble-wrap around the item(s), before packing them in a sturdy box with polystyrene chips or plenty of crumpled newspaper, preferably to a thickness of 1-2 inches all around. Don’t forget to include a copy of your repair form. Secure with adhesive tape. (If you are using your original manufacturer’s box, we will do our best to keep it in the same condition and return it with your equipment, but we cannot take responsibility if it is returned to you in less immaculate condition than it was sent).
Send your parcel to us at:
Fixation (UK) Ltd, Unit C, 250 Kennington Lane, London, SE11 5RD
Shipping notes:
Within EU
If you are sending equipment within the EU, no restrictions apply –you may use whichever secure and traceable means of shipping you choose.
Outside EU
If sending equipment from outside the EU, please use a major shipping company such as FEDEX, DHL, Parcelforce, TNT or UPS, as this will ensure that correct customs procedures are followed to enable us to return your equipment to you without incurring duty (which would have to be passed on to you). If you ship your equipment from outside the EU and it will remain in the EU after repair, please be advised that we may have to pass on customs import duty and clearance charges incurred.
Channel Islands
If you choose to ship from the Channel Islands by Royal Mail, please be aware that there will be a delay caused by the need to provide documentation for customs clearance. We apologise for this situation, which is beyond our control. For more efficient shipping, please use one of the shipping companies listed under ‘Outside EU’ above.
A service estimate, which is provided free of charge, is given by a technician and relates to equipment that has been booked in to Fixation for service or repair. The service estimate includes non-invasive testing of the equipment and diagnosis based on the technician’s knowledge of repairing the same models in the past.
Estimates are subject to re-estimation. Sometimes on closer inspection (particularly in the case of liquid damage and impact), more parts are found to be damaged or a different part to usual is discovered to be the cause of the fault. In these rare instances, the admin team will contact you with a revised estimate before any more work is carried out.
Rough prices provided by the admin team before equipment arrives or at the point of booking in cannot be guaranteed and are always subject to a technician’s inspection once the equipment arrives in the workshop.
If you require an estimate for work, we aim to prepare this within 48 hours of the equipment being booked in, but can sometimes take up to 4 days, depending on our workload. For the sake of speed, this will normally be emailed to you as soon as the administration team is able to do so. You may specify if you prefer to receive estimates by telephone, email or fax.
After receiving an estimate, you can instruct us to go ahead and complete the repair, or to return your equipment. Should you decide not to go ahead with the repair work stated, you are responsible for collecting the equipment from our workshop or paying for a return delivery.
If you require an insurance letter and wish the equipment returned to you without repair or replacement, we charge a £25 administration fee and £10 shipping, plus VAT. If you subsequently have the repair completed or buy replacement equipment from us, we will refund the administration fee.
Our current turnaround times typically range from two working days and upwards, depending on demand and the supply of spare parts.
In order to adhere to our founding principle of serving professional photographers, we reserve the right to prioritise our workload as we see fit, which may occasionally mean non-professional customers will have to wait slightly longer for repairs.
If you bring us equipment that, for whatever reason, we are unable to repair on-site, turnaround times are beyond our control. You will be advised of the expected wait on an individual case basis.
Please note that we maintain stocks of commonly used parts for Nikon, Canon, Sony, Profoto, Bowens, Tamron and AquaTech, but spares for less common models, rarely used parts or very expensive parts for older models are usually ordered when needed. We order spares from Nikon, Canon and Sony at least twice per week, so the exact time to complete your repair may vary. For parts available from stock, Nikon spares arrive next day, Canon and Sony in 2-3 days. Parts not available from stock normally arrive in 2-3 weeks from central European stocks. We do not receive estimated delivery dates for parts not available from stock.
We use UPS and Royal Mail for the majority of repair dispatches. These are all next-working-day services within the UK and our standard charge within mainland UK is £10 plus VAT. If your consignment is large or heavy, we may increase this charge to cover our costs. If you require a timed or Saturday delivery, a supplement is normally added. To guarantee next-day delivery, arrangements and payments must be made by 2pm on the day of dispatch.
Unless otherwise stated on your repair report, we will offer you a six month guarantee on the repairs we carry out. However, if you have a further problem within six months, we will take a generous view and do our best to resolve the issue at least cost.
Repairs completed or left unrepaired as per your instructions and not collected or paid for after six months will be disposed of to recoup our costs. We will send a Recorded Delivery letter to the address held on file to inform you before we take this action.
We can undertake manufacturer warranty repairs on Canon, Nikon, Sony & Profoto equipment. To ensure an estimate is not raised on your warranty repair, please provide a proof of purchase (and preferably a warranty card if applicable) when you send or bring your repair in.
All warranties are subject to manufacturer’s terms and conditions (confirmed on inspection only) and please note that in most cases warranties are not valid on grey import goods, so repairs to such are likely to be chargeable.

Focus Issues
Correct focus is vital for the serious photographer and we’ve all been frustrated when an otherwise great image is let down by a lack of sharpness. Soft images can be caused by a multitude of different issues, some that indicate a fault in the camera or lens, others that may require a change of technique or settings. We’ve outlined some of the most common causes of sharpness problems below. If you have been through all these points, taken corrective actions and are still experiencing issues, it may be that your kit is at fault; in which case get in touch and our repair technicians will be happy to take a look.Unfortunately, there is no getting away from the fact that the quality of the lens you are using has a significant impact on its ability to resolve detail. This can mean a higher price tag, but there is no doubt that it is worth investing in the best quality glass you can afford. This is particularly important if using one of the top-end DSLR sensors where resolution is sufficiently high to render the tiniest of detail. Unfortunately, this also means they can also capture the smallest of movements in the equipment, so if you have recently upgraded your camera you may need to get accustomed to shooting with a tripod or at a faster shutter speed than previously to eradicate any blur.
Most photographers are aware that use of a teleconverter will impair sharpness, but may be surprised by the difference a filter can make. Again, it is worth investing in a good one to minimise any negative effect. Whatever lens or filter you are using, don’t forget to keep them clean! A layer of dust, smears or fingerprints on the outer optics will not be conducive to optimum image clarity!
It is not only sensors that have become more sophisticated; autofocus technology has too. Cameras are now equipped with a vast array of focus options and areas, but this doesn’t mean they are capable of predicting your intention, so you will need to ensure you choose the best settings for the situation. Select the most appropriate AF point for the area you want to focus on and don’t confuse the camera by using multiple focus points or a predictive AF setting for stationary subjects; save this for when you need to track moving subjects. If you think you are experiencing sharpness problems, make sure you test it on single-point focus.
We are sure most of you don’t need reminding, but if your shutter speed is not fast enough when shooting handheld, the resulting images will suffer from the effects of camera shake. When this occurs, there will be all-over blur with no sharp areas in the image. As a general rule, the speed you use should be at least as fast as the focal length (or effective focal length) of the lens. So, if you are hand-holding a lens with an effective or actual focal length of 200mm, you will need to employ a shutter speed of at least 1ƒ/250sec to avoid blur. A lens with VR or IS should enable you to achieve good results with speeds 2-3 stops slower. However, if this does not appear to be the case your lens may require attention from our service department.
The sharpness of any lens will not be constant, it will change with the aperture, focal length and subject distance in use. Using smaller apertures can create diffraction blur and larger ones defocus blur. Every lens will have a “sweet spot” – one particular aperture setting that will produce maximum resolution of the in-focus area and this is usually a few stops down from wide open. Many users expect the widest aperture to be the sharpest and sadly this is not the case – if sharpness is more important that the depth of field, try finding the sweet spot of your lens and always bear this in mind to get the best balance for your needs.
Don’t make the mistake of believing that sharpening is a correction tool – it isn’t. In fact it is way of enhancing the edges within an image by increasing the contrast and thereby increasing definition and revealing detail. Don’t overdo it, but we would recommend applying some in-camera or in post-production, or your images will lack bite and appear soft.
This can sometimes be the case, but it is rare. At the time of production, there will be a range of acceptable tolerance for the focus set-up of the camera and lenses. In most cases, any slight difference within that scale will be unnoticed, but if the body is at one end of the tolerance scale and the lens at the other, you may find that the two together produce a slight back or front focus; the actual point of focus is slightly behind or in front of the intended subject. Your camera may have an AF Fine-Tune or Micro-adjustment feature that will enable you register the AF position for an individual lens, from which the camera will compensate every time that lens is attached.
It should be noted that this facility should not be necessary for most lenses and is not intended to be a substitute for attention in a service department where fundamental optical problems are concerned.
If you have eliminated user issues, our Service Department is here to help remedy any fault with your Nikon or Canon body or lens; but there may still be some investigation required to identify the cause of the problem. Sample images can often help us in this respect, but they must be RAW or unedited JPEGs. This way, we can view the shooting data and even the focus area that was in use at the time of shooting. Your images may help us to identify the problem, or at least to reproduce the conditions in which it is exhibited. It will also help if you can identify which item is giving you the problem; are your images soft with numerous lenses, indicating a possible fault with the body, or is a single lens the culprit?
For focusing to be accurate, the camera’s body dimensions/depth – or the measurements from lens mount to the plane of focus – must be correct to within a fraction of a millimetre. Correcting any anomalies with the dimensions could require a realignment or calibration of the mirrors or sensor, but if there is damage/distortion to the bayonet or internal frame of the camera, the affected parts will need to be replaced.
You may not always be aware of it happening, but lenses do get knocked and some internal parts may also be subject to wear, including those keeping the lens elements in place. This will affect optical alignment, meaning image sharpness/resolution will suffer. The Fixation technicians will replace any worn or damaged parts, ensure all the optics are properly centred and perform the set-up/calibration process to return your kit to the manufacturer’s specification.
There can be many reasons why equipment fails to find focus at all, ranging from dust on the camera’s AF sensor to misplaced optics in the lens. Before concluding there is a fault, however, it’s worth checking a couple of things. For example, is there sufficient light or contrast for the equipment to focus? And what is the minimum focus distance of the lens in use? If your subject is too close for that particular lens, it will not find focus.
In a separate process to the actual focusing, the prism in the top of the camera will reflect the image into the viewfinder to assist you with composition. Because manufacturers know that users’ eyesight will vary, most modern DSLRs have a built-in dioptre that can be adjusted to improve the clarity of the viewfinder for the individual. This adjustment is usually done via a dial or slider at the side of the viewfinder. Try moving this until the LED info or grid lines displayed in the viewfinder are as sharp as possible to your eyes. If the adjustment is ineffective, the viewfinder optics may need attention from our technicians.
Failure to activate the AF is likely to mean that a trip to the service centre is unavoidable, but it still may be worth a quick check of the basics. Some lenses will have a switch for AF or MF and the camera also needs to be set to one of the AF modes, rather than to manual focus. If your camera has an ‘AF-ON’ button on the rear, top or right side of the camera, it is worth checking to see if this activates the AF instead. If it does, the issue may be solely with the shutter-release button, rather than a more major AF problem. Better still, it may be that you have unwittingly selected a custom setting that has activated this button for AF, rather than your shutter release. If you don’t know where to find this option, a quick reset of your settings should rectify it.
Most AF zoom lenses designed for DSLR stills photography are varifocal, rather than parfocal. This means they are not designed to retain focus throughout the zoom range and there is likely to be some shift of focus when zooming, which is perfectly normal. Designing them as parfocal would mean big compromises in terms of size and price, and generally users of such lenses do not require it because they use the AF function, so the focus shift is of no consequence.
Where parfocal lenses may be needed is in video production/cinematography and we would recommend lenses designed specifically for this purpose.
Again, we are back to the varifocal nature of most lenses, which means that infinity focus will shift with different focal lengths. In addition, lens components will expand and contract with temperature changes, which will also affect the focus position. Plus, a hard stop at the point of infinity is likely to damage – or reduce the life of – the strong motors required to move focusing elements speedily, so all things considered, it’s probably no bad thing.
Recycling
Fixation is able to offer convenient in-store service for customers to return their old electrical or electronic items for further disposal by a professional WEEE management organisation.
Anything with a plug, battery, or cable can be recycled or reused!
How it works:
If you're buying a new electrical or electronic item from us we will recycle the one you’re replacing for free. Simply bring the old electrical item in within 28 days to our showroom or service desks, show us the receipt for its replacement*, and we'll do the rest.
Alternatively, recycle your electrical and electronic devices at your local recycling centre. To find your nearest centre, visit the Recycle Your Electricals website and type in your postcode.
Together we can stop precious resources from being lost forever, save lives and help protect the planet.
*Like-for-like items accepted only. A like-for-like item should be similarly sized and from a similar product category as the purchased item. Proof of purchased item required (eg. Invoice/receipt). Please note that we reserve the right to refuse an item that is too heavy to be picked up by one person or for health and hygiene reasons.
What is WEEE?
The Waste Electrical or Electronic Equipment (WEEE) Directive requires countries to maximise separate collection and environmentally friendly processing of these items. Waste Electrical and Electronic Equipment (WEEE) is regulated by the UK Government. Find out more here.
Why Recycle
Recycling and reusing unwanted electrical or electronics can help save the planet, boost the economy and improve lives. Not only that, electrical and electronic equipment (EEE) contains materials, parts and substances which can be dangerous to the environment and harmful to human health if not disposed of correctly.
Electrical and electronic equipment is now the fastest growing waste stream in the UK and across the world.
Discover the impact of reusing and recycling your electricals by visiting the Recycle Your Electricals campaign's website.
We’re proud to be working with the national Recycle Your Electricals campaign and to support your local authority in providing local recycling facilities for electrical equipment.
To remind you that old electrical equipment can be recycled, it is now marked with the crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with this symbol) in your bin.
How are we helping?
In the UK, distributors including retailers must provide a system that allows all customers buying new electrical equipment the opportunity to recycle their old items free of charge. As a retailer that provides electrical or electronic equipment on a regular basis to end users we are obliged under The Waste Electrical and Electronic Equipment Regulations Act to provide all of our customers with a safe and accessible way in which to dispose of their electrical equipment.
To find more information on WEEE recycling and to locate your nearest recycling centre please visit the Recycle Your Electricals website.
Contact Us

Arriving by bicycle
We now have a secure bicycle hoop for your convenience; please let us know if you need to borrow a security lock. Please note that bicycles are not allowed to be brought into the premises.Parking at Fixation
As a Fixation customer, you are welcome to use one of the nine parking spaces marked Reserved for customers of Fixation during your visit. However, please note that you may not continue to use the space after leaving Fixation and that the other spaces in the car park are not for customer use – the landlords of the building operate a clamping scheme.Walk
Use the Oval exit from the National Rail station or Exit 3 from the Underground station. Once on South Lambeth Road:
- Cross over towards the Vauxhall Tavern pub and turn right along the pavement
- Follow this for about 300 yards past the two churches (one right, one left) and past the Lilian Baylis school on the right
- Past the next traffic lights, just before the petrol station on the left, you will arrive at a car park with the sign ‘250 Kennington Lane’ at the entrance
- Unit C is the left-hand unit, clearly marked
Walk through the pedestrian tunnel to the left of the Vauxhall National Rail station entrance. Once on South Lambeth Road:
- Cross over towards the Vauxhall Tavern pub and turn right along the pavement
- Follow this for about 300 yards past the two churches (one right, one left) and past the Lilian Baylis school on the right
- Past the next traffic lights, just before the petrol station on the left, you will arrive at a car park with the sign ‘250 Kennington Lane’ at the entrance
- Unit C is the left-hand unit, clearly signed
- Turn left towards the cricket ground
- Cross over and turn right into Kennington Oval street, then stay on this street until you reach Vauxhall Street on the right
- Turn onto Vauxhall Street and at the traffic lights with Kennington Lane, turn right and cross over
- Just before the petrol station on the left, you will arrive at a car park with the sign ‘250 Kennington Lane’ at the entrance
- Unit C is the left-hand unit, clearly signed
Terms & Conditions
In any communication please quote the job reference number.
Conditions of repair
These conditions apply to any agreement between Fixation and any customer (individual or organisation) entrusting us with goods for evaluation or adjustment.
Fixation is a trading name of Warehouse Express Limited, 13 Frensham Road, Norwich. NR3 2BT. Company registration number 03366976. The Fixation London workshop and showroom is located at 250 Kennington Lane, London, SE11 5RD. The Fixation Manchester repair counter is located within Wex Photo Video Unit 4, Downing Street Ind Est. Charlton Place, Manchester M12 6HH
Important Note: All repairs/services are thoroughly checked before release but it is expected that a final check of the equipment be made by the user. Customers are asked to check that their camera has been restored to their preferred settings before use. Fixation cannot accept any liability for consequential loss due to failure of repair or delayed return.
Manufacturer’s Warranty
Any claim under the manufacturer’s warranty must meet the terms and conditions set out by the maker. Claims must be accompanied by the appropriate paperwork. As a minimum this means an acceptable proof of purchase; an applicable warranty certificate may also be required. Failure to provide the correct documentation may result in a chargeable repair. Be aware that warranties on digital products may be regional and therefore only valid in the designated area in which the manufacturer intended it to be sold. Grey imports and overseas purchases may therefore be exempt.
A warranty claim will also be refused if examination shows the cause is anything other than a manufacturing fault, including but not necessarily limited to:
- Improper use, damage or defects caused by incorrect storage, impact, excessive shock, liquid damage or damage by foreign substances.
- Repairs, modifications, tampering carried out by an unauthorised third party
- Damage caused by incorrect voltage input
- Use of spare parts or software not compatible with the product.
- Damage in transit.
Estimates
The estimates we provide are based on examination and diagnostic tools. Estimates may be subject to later revision if the internal condition of the equipment is not as anticipated (e.g. unforeseen damage or third party tampering), or if on further examination we find additional work is required. In these circumstances we will provide a re-estimate of the work and costs.
Our estimates should be suitable for insurance purposes, we would advise contacting your insurer for their policies and claim procedures. If additional letters are required further charges may apply.
Estimates are valid for 30 days from the date of the estimate.
Refusals
No refusal charge is incurred, but Fixation has insufficient storage space to hold items indefinitely and the return of the goods must be arranged within 4 weeks. Applicable arrangements include collection, payment of despatch charge (£10 + vat for standard, overnight delivery by courier) or authorisation to dispose of the goods on site. In the absence of such arrangements, a recorded letter will be sent and the item will be disposed of. We may charge storage fees if extended storage is requested.
Repair Times
All effort will be made to minimise turnaround time. Actual times will fluctuate according to demand and technician availability, but estimated turnaround times are updated on our website.
Any dates quoted by Fixation for completion of repair work are approximate and not guaranteed; we cannot accept liability for any consequential loss suffered as a result of a delayed repair. Some delays may occur whilst we await supply of spare parts required to complete a repair. Every effort will be made to keep the customer informed of progress, but such delays are beyond Fixation’s control and influence.
Payment
Repaired items will only be released on receipt of payment, where applicable. Payment is expected within 4 weeks of notification that the repair is complete.
Payment may be made in person upon collection of goods, or by telephone when arranging despatch. We accept payment by cash (collection only), debit/credit card (excluding American Express and Diners) or Bacs transfer (goods will only be released when funds have cleared into our account).
For card holders’ own security when taking telephone payments, anti-fraud checks are made based on matching the address of the registered card-holder. For this reason, we reserve the right not to accept payment by cards registered to non-UK addresses and in these circumstances a Bacs transfer may be required.
Where, despite documented reminders (by email and letter), items are not collected or paid for after three months, in accordance with the Disposal of Uncollected Goods Act, this equipment shall be disposed of in order to retain from the proceeds of such sale any amount sufficient to defray costs of repairs and expenses incurred in attempting to trace and notify the customer. The customer will be entitled to any balance, but no interest shall be payable on any amount retained by the company.
Repair Warranty
All Nikon & Canon repair work is guaranteed for a period of 6 months from the date of invoicing, unless otherwise stated (3 months for all other brands). Should any customer not be satisfied with work carried out, they must contact Fixation within a period of 3 months from the time of collection/despatch. All repairs are thoroughly checked before being released, but it is expected that a final check of the equipment be made by the user. Non-use of the equipment does not extend the guarantee period. Fixation shall not be responsible for any consequential loss or damage whatsoever claimed by reason of repairs carried out, or subsequent failure thereof.
The re-repair guarantee covers failure under normal operating conditions of previously repaired/replaced components and the associated labour.
All re-repairs are subject to inspection and at the discretion of the technician. Rejection of any claim (for example if the camera has suffered any physical damage or the subsequent fault is unrelated to the previous repair) will result in a new estimate and return shipping charges will apply.
Shipping charges may also apply if the camera proves to be working to specification with no further repair necessary.
Repairs covered by our repair guarantee will be returned via standard shipping at our expense (other shipping methods will be chargeable).
Goods in transit
We can advise on likely delivery dates, but these may not be 100% guaranteed. We cannot accept liability for any consequential loss arising from delayed deliveries. Consignments despatched via our main shipping options are insured and a signature will be required upon delivery.
Should the equipment appear to be damaged upon unpacking, please retain the item and the packaging (even if unmarked) and notify the Service Department immediately to initiate the claim procedure.
These terms and conditions are raised in addition to and should be read in conjunction with our standard Hire Terms and Conditions. They apply to any courtesy loan of equipment for whatever reason. The term “hirer” refers to the customer who is being loaned the equipment by Fixation. Acceptance of Courtesy equipment is taken as acceptance of these Terms and Conditions, whether or not this document is signed where indicated by the hirer.
Circumstances
Fixation may agree to loan courtesy equipment under certain circumstances, including but not limited to the following:-
a. Where a customer has purchased new Nikon or Canon equipment from Fixation and suffers a failure of the equipment during the warranty period, which is not due to customer misuse or abuse. If Fixation is satisfied that the fault is a valid warranty claim, and is unable to complete satisfactory repairs within two working days of the equipment being submitted to Fixation for inspection, then Fixation will issue loan equipment for the period until repairs are completed. Whilst Fixation will endeavour to provide replacement with the same model, if this is not available for whatever reason, we will supply the next most appropriate model.
b. Fixation may agree to loan courtesy equipment where a customer believes that a repair carried out by Fixation’s own workshop has not been satisfactorily completed. Fixation reserves the right to inspect the equipment before issuing a loan to verify the customer’s claim. Whilst Fixation will endeavour to provide replacement with the same model, if this is not available for whatever reason, we will supply the next most appropriate model.
c. If a customer suffers a service failure due to an oversight or error by a member of Fixation staff, or by an agency outside of our business through no fault of the customer, if appropriate, we may, without prejudice and as a gesture of goodwill, offer to loan alternative equipment to enable the customer to continue their business activities.
In all circumstances, if the customer requests a replacement unit to be sent before Fixation have satisfied themselves of the fault or error, then such equipment will be issued on a chargeable basis, and may be altered to courtesy loan subsequently if circumstances meet the necessary conditions.
Shipping or Courier charges
Fixation will bear the cost of sending Courtesy equipment to the customer. The cost of returning the equipment to Fixation shall be borne by, and be the responsibility of the hirer.
If Fixation is sending equipment out, we reserve the right to request proof of address for non-account customers, and we will only ship to this address.
Period of Loan of Courtesy Equipment
It is a strict condition of this agreement that the period of loan expires 48 hours after Fixation has informed the customer that their repair is completed and ready for collection. Fixation will make all reasonable effort to contact the customer by email, telephone, text message or any other means at Fixation’s disposal to inform the customer that their repair is complete. If the customer fails to return the Loan equipment within 48 hours, the loan will become chargeable at our normal rates.
All other normal terms and conditions relating to Liability, Deposits, Insurance, Loss and Damage, Availability, and Accessories also apply to this agreement.
Privacy Policy
What information we collect about you
Fixation collects and process data in accordance with the General Data Protection Regulation (GDPR) (EU) 2016/679. Fixation needs to have address and contact details in order to have full traceability whilst your equipment is in our possession. We may collect and process all or some of the following information:
- Name
- Address details
- Phone number
- Email address
- Age
- Gender
- Birthplace
- Marketing preferences
- Credit history
- Employment status
- Order history
- Copies of ID (Physical or Digital)
- Activity on our website – this is gathered by the use of cookies in your web browser. You can learn more about our use of cookies here.
- Computer IP address
How we will use the information about you
We will only hold your personal details for the purposes of contacting you ourselves about your repairs, your sales orders, your indebtedness to us or our ongoing business with you. We log visitor IP addresses and cookie preferences for due diligence reporting.
Marketing
We may use your email address to send you products and services information or for personalised advertising, and provide it to third parties only when acting on our behalf for this purpose. If you have allowed us to send marketing information to you, you may opt-out of such communications at any time by using the unsubscribe link in our emails or contacting us and asking to opt out.
Will we share your information with anyone else?
Sometimes we need to share your personal data with trusted third parties. In these instances, your data will only be used for the exact purpose we specify, will be transferred and stored securely, and will be deleted or rendered anonymous if we stop working with that third party.
Examples of the third parties with whom we share data are:
- Payment-processing services
- Delivery couriers and postal services
- Email marketing service providers
- Event ticketing services
- Marketing mailing houses
- Customer service management systems
- Companies who show you personalised content on our website and in emails
- Marketing companies who analyse our customer data
- Product-review companies
This list is not exhaustive and may change from time-to-time in line with our business processes. Please be assured that we will only ever share your information with trusted parties who adhere to GDPR and the correct standards of security.
How long we keep your data
We will only keep your data for as long as it’s needed. After that, we’ll either delete it completely or render it anonymous (removing personal data but keeping information such as order amount for business analysis).
If you contact us for a repair estimate or a quote and you don’t consent to marketing, we’ll keep your data for a year in case you wish to proceed with the repair or quote.
If you order from us, we’ll keep your data for six years in order to comply with legal obligations. You can request that some of this is removed sooner – see below.
After six years we will remove your data unless you have consented to our marketing.
You have the right to:
- Access your personal data, free of charge
- Have your personal data rectified if out of date or incorrect
- Have personal data erased, unless that would conflict with our legal obligations
- Withdraw consent for us to use personal data, if you have previously given consent
- Object to us processing your personal data and/or stop us using data for direct marketing
If you would like to exercise any of these rights, you should contact us.
Your rights over personal data
You have the right to:
- Access your personal data, free of charge
- Have your personal data rectified if out of date or incorrect
- Have personal data erased, unless that would conflict with our legal obligations
- Withdraw consent for us to use personal data, if you have previously given consent
- Object to us processing your personal data and/or stop us using data for direct marketing
If you would like to exercise any of these rights, you should contact us.
How to lodge a complaint with a supervisory authority
If you are unhappy with our use of personal data, you have the right to lodge a complaint with the Information Commissioner’s Office.
The ICO’s contact details can be found on the organisation’s website, here.
About this cookie policy.
What are cookies ?
How do we use cookies ?
What types of cookies do we use ?
necessary
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
advertisement
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
others
Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.
performance
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
analytics
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
functional
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Cookie | Description |
---|---|
necessary | |
viewed_cookie_policy | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
sessionId | This cookie, set by Microsoft, is used by the website to store the user's session ID and is sent with each request to the ASP.NET application. |
advertisement | |
mako_uid | .eyeota.net sets this cookie to collect data about the users' visit to the website such as the pages visited. A users' profile is then created in terms of their interest and demographic and is used for targeted advertising. |
dpm | The dpm cookie, set under the Demdex domain, assigns a unique ID to each visiting user, hence allowing third-party advertisers to target these users with relevant ads. |
i | This cookie is set by OpenX to record anonymized user data, such as IP address, geographical location, websites visited, ads clicked by the user etc., for relevant advertising. |
_kuid_ | The cookie, set by Krux Digital, registers a unique ID that identifies a returning user's device. The ID is used for targeted ads. |
_rxuuid | Unruly Media sets this cookie to store information on how the end user uses the website and any advertising that the end user may have seen before visiting the said website. |
fr | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
IDE | Google DoubleClick IDE cookies are used to store information about how the user uses the website to present them with relevant ads and according to the user profile. |
anj | AppNexus sets the anj cookie that contains data stating whether a cookie ID is synced with partners. |
chkChromeAb67Sec | PubMatic sets this cookie for testing purposes on Google Chrome browsers with a version above 67. |
KADUSERCOOKIE | The cookie, set by PubMatic, registers a unique ID that identifies a returning user's device across websites that use the same ad network. The ID is used for targeted ads. |
pi | The pi cookie is used by Bombora for audience targeting and advertising. |
uuid2 | The uuid2 cookie is set by AppNexus and records information that helps in differentiating between devices and browsers. This information is used to pick out ads delivered by the platform and assess the ad performance and its attribute payment. |
tluid | This cookie is set by the provider AdRoll to identify and show the visitor relevant ads by collecting user data from multiple websites. |
stx_user_id | This cookie is set by Sharethrough to deliver targeted and relevant content. |
test_cookie | The test_cookie is set by doubleclick.net and is used to determine if the user's browser supports cookies. |
KTPCACOOKIE | The cookie, set by PubMatic, registers a unique ID that identifies a returning user's device across websites that use the same ad network. The ID is used for targeted ads. |
bkpa | Set by Bluekai, this cookie stores anonymized data about the users' web usage in an aggregate form to build a profile for targeted advertising. |
bku | Bluekai uses this cookie to build an anonymous user profile with data like the user's online behaviour and interests. |
B | This Cookie is used by Yahoo to anonymously store data related to user's visits, such as the number of visits, average time spent on the website and what pages have been loaded. This data helps to customize website content to enhance user experience. |
CMST | Casale Media sets this cookie to collect information on user behavior, for targeted advertising. |
IDSYNC | This cookie is set by Yahoo to store information on how users behave on multiple websites so that relevant ads can be displayed to them. |
CMRUM3 | CMRUM3 cookie is set by CasaleMedia for anonymous user tracking based on user's website visits, for displaying targeted ads. |
CMPRO | CMPRO cookie is set by CasaleMedia for anonymous user tracking, and for targeted advertising. |
CMPS | CMPS cookie is set by CasaleMedia for anonymous user tracking based on user's website visits, for displaying targeted ads. |
CMID | Casale Media sets this cookie to collect information on user behavior, for targeted advertising. |
TDCPM | TDCPM cookie is set by Cloudflare service to store a unique ID that identifies a returning user's device which is then used for targeted advertising. |
TDID | TDID cookie is set by Cloudflare service to store a unique ID that identifies a returning user's device which is then used for targeted advertising. |
audience | SpotXchange sets this cookie as a unique ID that tracks audiences internally. The cookie is used to limit the number of repetitive ads shown to the user. |
PUBMDCID | PubMatic sets this cookie to store an ID that is used to display ads in the users' browser. |
_fbp | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
KRTBCOOKIE_32 | This cookie, set by PubMatic, is used to build a profile of user interests and to show relevant ads. |
_msuuid | This cookie is used by Marin Software to deliver a series of advertisement products such as real time bidding from third party advertisers. |
DotomiUser | This cookie is set by the provider Dotomi. This cookie is used for sales/lead correlation and for targeting and marketing purposes. it is used to store unique surfer ID. |
DotomiSession | Not currently used. Legacy support for session ids. |
DotomiTestSession | “TestSession”, used to ensure only one DotomiTest cookie is set per session to check browser’s ability to accept cookies |
dtm_token_sc | Dotomi first party cookie set via headers on registration tags |
dtm_token | Manages cookie level profile, freq. cap, retargeting |
uid-bp-37329 | Identifier for FreeWheel online advertising platform |
_msuuid_2476377x58377 | This cookie is used by Marin Software to deliver a series of advertisement products such as real time bidding from third party advertisers. |
DotomiSync | Used to identify which sync pixels are set via registration tags |
DotomiTest | “Test”, used to check the browser’s ability to accept third party cookies |
DotomiSession_80224 | Not currently used. Legacy support for session ids. |
others | |
ipc | No description available. |
A3 | No description |
data-co | No description |
_dc_gtm_UA-71163925-1 | No description |
performance | |
INGRESSCOOKIE | This cookie is used for load balancing and session stickiness. This technical session identifier is required for some website features. |
SERVERID | This cookie is set by Slideshare's HAProxy load balancer to assign the visitor to a specific server. |
SyncRTB3 | These cookies maintain a list of PubMatic partner’s pixel IDs, which may be used to read and place cookies on a web browser, that have been synced with PubMatic IDs. This enables us to identify the partners with whom we have already synced our cookies and to ensure that we do not unnecessarily sync cookies again within a certain period of time. |
analytics | |
demdex | The demdex cookie, set under the domain demdex.net, is used by Adobe Audience Manager to help identify a unique visitor across domains. |
APID | This cookie is set by Yahoo to store information on how users behave on multiple websites so that relevant ads can be displayed to them. |
_gid | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
UID | Scorecard Research sets this cookie for browser behaviour research. |
_gcl_au | Provided by Google Tag Manager to experiment advertisement efficiency of websites using their services. |
_ga | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
functional | |
PugT | PubMatic sets this cookie to check when the cookies were updated on the browser in order to limit the number of calls to the server-side cookie store. |
How can I control the cookie preferences ?
Powered By WebToffee